Optics India Equipments Pvt. Ltd.
Adj Pnb, Anand, Gujarat
GST No. 24AABCO5728M1Z7
TrustSEAL Verified
Call 0804861401178% Response Rate
SEND EMAIL
Product Details:
| Cylinder Power Range | 0~+-10D(0.01/0.12/0.25D Step) |
| Sphere Power Range | -25 D to +25 D |
| Weight | 6.8 Kg |
| Model No | GL7700/8800 UP |
| Power Supply | 100 - 240V, AC 50/60 Hz |
| Tilting Angle Range | Max 80 degree |
| Lens Diameter Range | Max 100mm |
| Cylinder Axis | 0 Degrees through 180 Degrees (1 Degree Steps) |
| Sphere Power | -25D to +25D (0.01D, 0.12D, 0.25D Steps) |
| Machine Grade | Fully Automatic |
| Screen Display | 5.7 Inches (14.5 cm) Color LCD monitor |
| Axis Angle | 0~180 degree (1degree STEP) |
| Prism | 0~+-10D(0.01/0.12/0.25D Step) |
| UV Measurement | 0~100%(5% Step) |
| PD Measurement | 45 to 85mm (0.5mm Step) |
| Lens | Glassn Lenses, Hard/Soft Contact lenses |
| Monitor | 5.7 inch TFT VGA (640x480) colour LCD, Tilt Max 80 Degree |
| Marking Catridge | White |
| Printer | Thermal Printer with automatic cutter(58mm width) |
| Output | RS232 interface with 9 pin |
| Rated Voltage | 100to 240VA 50/60Hz |
| Consumption | 40VA |
As before, it can recognize the progressive lens automatically and go into the progressive lens measurement mode. In addition, with the advanced measurement logic, it guides to the precise near point that makes the measurement much easier.
New Compact SizeLess than half of our previous model. Table top size is 50% less and weight is 30% less. It can be placed in the sales area and one can measure the old glasses of client while they are choosing a new frame.
Much higher resolution with the tilting feature.Taking a step forward to the ergonomic design, it can be now used both in standing and seating position comfortably with the limited movement of visual line.
Throw in PrinterFaster printing speed with easier setting of the printer paper. Just put the printer paper and close the door. There is no need to set it precisely.
Connection with GS Remote Vision RV-???It can be connected with our GS Remote Vision RV-??? to systemize the measurement data of client.
Lens Plate can be moved and stopped at any position without touching any lever. It allows to measure the up and the down prism on right and left more precisely than ever.
White Color Marking can be seen even on the dark color lens with the water resistance coating. Then, it allows Auto Blocker to recognize it as the light does not go through much.
Additional Information:
Product Details:
| Brand | Grand Seiko |
| Cylinder Power Range | 0 Degrees through 180 Degrees (1 Degree Steps) |
| Sphere Power Range | -25D to +25D (0.01D, 0.12D, 0.25D Steps) |
| Weight | 6 Kg |
| Model No | GL8800UP |
| Power Supply | 100-240V,50/60 Hz |
| Tilting Angle Range | Max 80 degree |
| Lens | Glass Lens,Hard and Soft Contact Lens |
| Output | RS-232C Interface |
| Dimensions | 200x395x365 mm |
| Wave Length | 660 mm |
| Thermal Printer Width | 58 mm |
| Display | 5.6 Inch LCD |
| Lens size | Max 100 mm |
| Power Consumption | 40 VA |
| Axis Angle | 1~ 180s (1s step) |
| Prism | 0~+-10D(0.01/0.12/0.25D Step) |
| UV Measurement | 0~100%(5% Step) |
| PD Measurement | 45 to 85mm (0.5mm Step) |
| Monitor | 5.7 inch TFT VGA (640x480) colour LCD,Tilt Max 80 Degree |
| Marking Catridge | White |
New UV Measurement
Able to measure the UV-A(375nm) that is harmful to the human eye in 5% step and display it. By just pressing the switch, one can compare the 2 lenses. With this feature, it allows to explain easily the difference of UV transmit-tance between the old and the new lens. (GL-8800UP only)
New PD Measurement
PD Measurement feature is added newly. Left and right PD as well as total PD can be measured precisely in 0.5mm step. (GL-8800UP only)
New Green Measurement LED
Measurement light is now changed to GREEN with the wavelength of 525nm as it is being improved. It allows measuring of the normal index to the high index precisely without changing Abbe.
Advanced Progressive Lens Measurement
As before, it can recognize the progressive lens automatically and go into the progressive lens measurement mode. In addition, with the advanced measurement logic, it guides to the precise near point that makes the measurement much easier.
New Compact Size
Less than half of our previous model. Table top size is 50% less and weight is 30% less. It can be placed in the sales area and one can measure the old glasses of client while they are choosing a new frame.
New Tiltable LCD with Switch Panel
Much higher resolution with the tilting feature.Taking a step forward to the ergonomic design, it can be now used both in standing and seating position comfortably with the limited movement of visual line.
Throw in Printer
Faster printing speed with easier setting of the printer paper. Just put the printer paper and close the door. There is no need to set it precisely.
Connection with GS Remote Vision RV
It can be connected with our GS Remote Vision RV to systemize the measurement data of client.
Strong Measurement
Dark Sunglass Lens can be measured as ever.
Single Step Fixation of Lens Plate
Lens Plate can be moved and stopped at any position without touching any lever. It allows to measure the up and the down prism on right and left more precisely than ever.
Easier replacement of Marking Cartridge with White Color
White Color Marking can be seen even on the dark color lens with the water resistance coating. Then, it allows Auto Blocker to recognize it as the light does not go through much.
Additional Information:
Product Details:
| Brand | Shinonken |
| Sphere Power Range | 0+-25D 0.01/0.12/0.25D Step |
| Weight | 5 Kg |
| Model No | Lx 540 |
| Printer | Thermal Print |
| Lens Diameter Range | 20-108mm |
| Cylinder Axis | 0-+9.99D 0.01/0.12/0.25D step |
| Sphere Power | 0-+25D 0.01/0.12/0.25D step |
| Package | 515X320X360 mm |
| Diamensions | 222X161X372 mm |
| Display | 5.6 Inch TFT LCD |
| Daimeter of Lens | 20-108 mm |
| Prism Degree | 0-15 0.01/0.12/0.25 D step |
| PD | 45-90 mm,0.25 mm step |
| Axis Angle | 1~ 180s (1s step) |
| UV Measurement | 0-100% |
| Contact Lens | Soft and Hard |
| Measuring Mode | Single/Progressive automatic recognition |
| Speed Measurement | 0.1s |
| Power Supply | 100-240V,50-60Hz |
Additional Information:
Product Details:
| Brand | Shinonken |
| Cylinder Power Range | 0+-9.99D 0.01/0.12/0.25D Step |
| Sphere Power Range | 0+-25D 0.01/0.12/0.25D Step |
| Model No | Lx 560 |
| Dimensions | 222 x 161 x 372 mm |
| Weight | 6 Kg |
| Display | 7 Inch TFT LCD |
| Lens Diameter Range | 20-108 mm |
| Prismatic Value | 0-15 0.01/0.12/0.25 D Step |
| Axis Angle | 1~ 180s (1s step) |
| Prism Measurement Mode | X-Y,P-B |
| Contact Lens | Soft/Hard |
| Measuring Mode | Single/Progressive automatic recognition |
| PD | 40-86 mm,0.5 mm step |
| Speed Measurement | 0.1s |
| Printer | Thermal Printer |
| Power Supply | 100-240V,50-60Hz |
Product Details:
| Brand | XINYUAN |
| Cylinder Power Range | 0~+-9.99D (0.01/0.12/0.25Dstep) |
| Sphere Power Range | 0~+-0.25D (0.01/0.12/0.25Dstep) |
| Weight | 5kg |
| Model No | D903 |
| Dimensions | 222x161x372 mm |
| Display | 5.6" TFT LCD |
| Lens Diameter | 20~ 108mm |
| Dimension | 440x410x620 mm |
| Input Power | 40 W |
| Pupil Distance | 45 ~ 90 mm(0.25mm steps) |
| Axis Angle | 0 degree ~ 180 degree ( 1 degree step) |
| Addition Power | 0~+-9.99D(0.01/0.12/0.25Dstep) |
| Prism Degree | 0~15Prism(0.01/0.12/0.25Prism) |
| Measuring Mode | Lens auto measuring |
| Prism Measuring Mode | X,Y/P,B |
| Measuring Speed | 0.1 second |
| Contact Lens | Soft / Hard lens |
| Thermal print | |
| Power Supply | 100~240V,50 to 60 Hz |
Additional Information:
Product Details:
| Sphere Power Range | -25 D to +25 D |
| Model No | D-900 |
| Contact Lense | Hard and Soft |
| Axis Angle | 0 to 180 |
| Additional Power | 0 to+-9.99 |
| Prism | 0 to 15 |
| Display | 3.5" |
| Lens Diameter Range | 12-90mm |
Additional Information:
4.3/5
Reviewed by 67 Users
Most Relevant Reviews